Product Description
The PXN-2104HS-4P/4K is a 4-channel PoE NVR built for jobs where camera count and PoE budget need to be checked before quoting, not after.
Key specs
- 4 channels, supporting IP cameras up to 8MP resolution
- 4x built-in PoE ports — direct plug-and-play power/data to compatible cameras, no separate injector or PoE switch required
- 80 Mbps total incoming bandwidth across all channels
- HDMI + VGA outputs, both driving up to 4K for the monitoring wall or local playback
- H.265 / H.264 / MPEG4 compression on the recording side
- ONVIF-compliant — accepts third-party IP cameras, not just Prolux-branded stock
- 1x SATA bay for local HDD storage
- Onboard VCA/intelligent analytics for event-based review
Spec'ing notes
Before pricing a 4-camera run at 8MP, confirm the total stream load stays inside the 80 Mbps incoming ceiling — this is a shared budget across all four channels, not per-camera headroom. The four PoE ports are independent, so power delivery to each camera is handled without pulling from an external switch, which cuts one failure point and one line item from smaller installs.
Dual OS architecture is present for recording stability, and remote access is supported via compatible mobile apps and client software for handover to the end user. Storage is single-bay, so plan HDD capacity against retention requirements and stream bitrate up front — the unit itself doesn't dictate capacity, only the interface (1x SATA).
Cross-reference the alternate part numbers (4M0229DPAZ6B2FF, PXN2104HS-4P-4K, GR-PXN-2104HS-4P-4K-LN) if matching against distributor stock sheets or older POs for this same unit.
Specifications
- Brand
- Prolux
- Model
- PXN-2104HS-4P/4K
- Series
- PXN Series
- Channels
- 4
- Max Resolution
- 8 MP
- Colour
- Black
- PoE Standard
- 802.3af/at
- Video Compression
- H.265/H.264
- Frame Rate
- 30fps
- App Compatibility
- IOS, Android CMS
- Storage Capacity
- Up to 10 TB
- Video Outputs
- HDMI, VGA
Technical Specifications
Frequently Asked Questions
How many cameras can this NVR power directly without an extra switch?
It has 4 built-in PoE ports, so up to four compatible IP cameras can be connected and powered directly with no separate PoE switch or injector needed.
What's the maximum camera resolution supported?
The PXN-2104HS-4P/4K supports IP cameras up to 8MP resolution per channel.
Does it work with non-Prolux IP cameras?
Yes, it supports the ONVIF protocol, so it's compatible with a range of third-party IP cameras alongside Prolux models.
What should I check before running four 8MP cameras on this NVR?
Check the combined stream bitrate against the 80 Mbps total incoming bandwidth limit, since that figure covers all four channels together, not each camera individually.
