Product Description
15m Cat6 U/UTP patch cable — spec sheet for installers
RJ45-NETWORK-CABLE-CAT6-15M-BLU is a fixed-length 15m Cat6 U/UTP patch lead, terminated both ends with RJ45 male connectors, supplied in blue for run identification on multi-cable installs.
Key specs
- Length: 15m (49.21ft)
- Category: Cat.6, U/UTP (unshielded twisted pair)
- Bandwidth: 250MHz supported
- Attenuation: 32.8dB/100m @250MHz
- Conductor: 24AWG copper, gold-plated copper alloy pins
- Jacket: PVC, 5.8mm diameter
- Housing: Polycarbonate connector shells
- Minimum bend radius: 69mm
- Operating temperature: -10°C to 60°C
- Storage temperature: -20°C to 75°C
Deployment notes
The U/UTP construction relies on twisted-pair geometry rather than a shielding layer for EMI resistance — fine for most office, home and CCTV runs, but keep away from heavy interference sources. Source states the cable is a dependable choice for both indoor and outdoor settings, so it can be run into external enclosures or camera positions as part of a wider installation.
At 250MHz bandwidth this is a standard Cat6 run — adequate for CCTV, VoIP and general data, though 10GBASE-T over the full 15m length depends on the switch/NIC hardware in use, not the cable spec alone.
Also listed under part numbers RJ45-NETWORK-CABLE-CAT6-15M-BLUE and GR-RJ45-NETWORK-CABLE-CAT6-15M-BLU-LN.
Specifications
- Cable Category
- CAT6
- Length
- 15m
- Connector Type
- RJ45
Technical Specifications
Frequently Asked Questions
Is this cable shielded?
No — it's U/UTP (unshielded twisted pair) construction, relying on twist geometry rather than a shield for EMI resistance.
Can it be used outdoors?
Yes, per the manufacturer it's a dependable choice for both indoor and outdoor settings.
What bandwidth does it support?
250MHz, with attenuation rated at 32.8dB/100m at that frequency.
What connector and conductor spec does it use?
Gold-plated RJ45 male connectors on 24AWG copper conductors, in a polycarbonate housing.
