Product Description
Cat6 40m RJ45 patch lead — one continuous run, no jointing
A single 40 metre Cat6 patch cable removes the need to couple shorter leads together when a run has to cross a building or reach a cabinet on the far side of a site.
RJ45-NETWORK-CABLE-CAT6-40M-W ships pre-terminated with standard 8P8C RJ45 connectors on both ends — no crimping, no punch-down, straight into a switch or camera port on arrival.
Key specs
- Standard: Cat6, rated for Gigabit Ethernet LAN traffic
- Length: 40m, fixed single run
- Connectors: RJ45 (8P8C), pre-terminated both ends
- Jacket: White, indoor-rated
- Compatible with: routers, switches, PCs, NAS, IP cameras and NVRs
Where it fits on a job
Use this length where a device sits genuinely further out — an IP camera at the far end of a warehouse, a PC in another room, a switch down a corridor from the comms cabinet. For IP CCTV, a wired Cat6 run is the reliable alternative to relying on Wi‑Fi for camera or NVR connectivity.
Before specifying
Measure the actual run first. At 40m fixed length, this lead suits longer point-to-point connections; for shorter runs a coupled joint or shorter patch lead wastes less slack and keeps cabinets tidier. The white jacket suits visible indoor runs and trunking rather than external or under-floor installs where a different jacket rating would normally be specified.
Specifications
- Cable Category
- CAT6
- Length
- 40m
- Colour
- White
- Connector Type
- RJ45
Frequently Asked Questions
What connectors does this cable use?
Standard 8P8C RJ45 connectors, pre-terminated on both ends for plug-and-play installation.
Will it support Gigabit speeds over the full 40m?
Yes, the cable is Cat6 rated and suitable for Gigabit Ethernet LAN networks.
Can it be used for IP CCTV camera connections?
Yes, it's compatible with IP cameras and NVR systems as well as routers, switches and PCs.
Is this cable suitable for outdoor runs?
It has a white outer jacket intended for indoor network setups, such as walls or trunking.
