Product Description
RJ45-NETWORK-CABLE-CAT6-4M-W is a 4m Cat6 patch lead terminated both ends with male RJ-45 connectors, supplied in white with snagless boots.
Key specs
- Standard: Cat6, U/UTP (unshielded twisted pair)
- Length: 4 m
- Conductor: stranded copper, 24 AWG
- Jacket: Low Smoke Zero Halogen (LSZH)
- Connectors: RJ-45 male/male, snagless boots both ends
- Colour: white
Application notes for install jobs
On a CCTV or network install, this lead sits between patch panel, switch, or NVR and the end device — camera, PC, or access point — wherever a fixed 4 m run is needed rather than a bulk cable pull. The LSZH jacket is relevant for internal containment or riser routes where low-smoke, halogen-free cabling is specified. U/UTP construction means no shield/drain wire — bond and earth accordingly if the run sits near sources of EMI.
As a pre-terminated lead rather than a bulk reel, it's supplied as a single finished cable at the stated 4 m length — not cut-to-length, and not sold per metre.
No PoE class or maximum PoE current is stated in the manufacturer data for this lead; where PoE budget matters on a run, confirm against your PSE/switch rating separately, as Cat6 U/UTP conductor gauge (24 AWG here) is only one factor in that calculation.
Specifications
- Brand
- Unbranded
Frequently Asked Questions
Is this cable shielded?
No — it's U/UTP (unshielded twisted pair), per the manufacturer's cable shielding spec.
What jacket material is used?
Low Smoke Zero Halogen (LSZH), relevant for internal containment or riser installations.
Is it sold as a bulk reel or a finished lead?
This is a pre-terminated 4 m patch lead with RJ-45 connectors at both ends, not a bulk reel or per-metre cut.
Does it support PoE?
No PoE class or current rating is stated in the source spec; check your PSE/switch PoE budget separately before relying on this lead for powered devices.
