Product Description
A fixed 2m Cat6 U/UTP patch lead for terminating short runs between cameras, NVRs, switches and patch panels where the equipment already sits close together — inside a cabinet, on a wall bracket, or across a rack.
Key specs
- Type: Cat.6, U/UTP (unshielded twisted pair)
- Bandwidth: 250MHz supported
- Conductor: 24AWG copper, gold-plated copper alloy RJ45 pins
- Attenuation: 32.8dB/100m at 250MHz
- Connectors: RJ45 male to RJ45 male, polycarbonate housing
- Jacket: PVC, 5.8mm diameter
- Minimum bend radius: 69mm — worth checking before routing inside tight patch panel or camera housing cavities
- Length/colour: 2m (4.92ft), blue
Operating range
Rated for -10°C to 60°C operation and -20°C to 75°C storage, which covers most internal cabinet and rack installs. This is a fixed-length lead, not bulk cable — it won't extend a long camera drop, and there's no shielding for runs alongside heavy electrical interference.
On the job
Typical uses on a CCTV install include patching a camera drop into a nearby switch port, linking an NVR to a PoE switch, or completing a short jumper inside a rack or cabinet where space and bend radius matter more than reach.
Specifications
- Cable Category
- CAT6
- Length
- 2m
- Colour
- Blue
- Connector Type
- RJ45
- Material
- Polycarbonate
Frequently Asked Questions
Is this cable shielded?
No — it's U/UTP (unshielded twisted pair) construction.
What bandwidth does it support?
250MHz, per the Cat.6 spec listed for this lead.
Can I use this to run a camera a long distance?
No — at 2m it's a fixed patch lead for short jumps between equipment that's already close together, not a long-run cable.
What's the minimum bend radius?
69mm, which is worth checking against your patch panel or camera housing clearance before routing.
