Hikvision DS-KV8213-WME1(C) – 2-Button PoE Villa Door Station

Overview

The DS-KV8213-WME1(C) is a two-button PoE villa door station for sites with two independent call routes off one panel — a gate plus a main door, or two separate flats sharing an entrance.

Key specs

• 2MP CMOS, 1920×1080 main stream (640×480 sub stream), ~124° horizontal / ~75° vertical field of view
• Digital WDR ~76.9 dB with DNR, for backlit entrance conditions
• IR supplement night vision to ~3 m
• Built-in 13.56 MHz MIFARE reader — up to 2,000 users, 10,000 cards
• 4 alarm inputs, 2 relay outputs for independent lock control, plus door contact inputs, tamper switch and exit buttons
• PoE (IEEE 802.3af), RJ-45 10/100 Mbps, power draw under 10 W
• 2.4 GHz WiFi (802.11b/g/n) as an alternative or backup connection
• IP65 and IK08 rated housing, operating range -40°C to +53°C
• G.711 U/A audio with noise suppression and echo cancellation; remote configuration via web interface or Hik-Connect app

Why the two-button layout matters

Each button rings independently, so the panel covers two entry points — pedestrian gate and main door, or two households sharing one entrance — without installing a second station. Route the two relay outputs to separate locks where the site needs both doors controlled from the same panel.

Physical

174 × 91 × 29 mm, approximately 0.370 kg, suited to surface or flush villa-entrance mounting given its weatherproof and vandal-resistant rating.