Product Description
DS-KD8003-IME1(B)-NS is the main module of Hikvision's modular door station range, built to take call button, keypad or card reader modules alongside it. It's the single unit an installer specs first, then extends per site requirement.
Key specs
- Camera: 2 MP fisheye, wide-area coverage of the entrance, with IR supplement for night-time identification
- Power: Standard PoE (single Ethernet cable for data and power)
- Lock control: Two independent electronic lock control outputs
- Auxiliary output: 12 V DC, 500 mA — direct lock power without a separate PSU
- Enclosure: Stainless steel housing, IP65-rated
- Management: Web-based remote configuration
Install notes
Running PoE means one cable to the door station — no separate lock power supply needed for a single-lock setup, since the 12 V/500 mA output is built in. For two-lock configurations, confirm your NVR or PoE switch's power budget covers the combined draw, as the dossier does not specify total unit consumption.
The fisheye field of view suits main entrances where a single camera needs to cover the full approach rather than a narrow corridor view. IR supplement maintains usable identification video after dark, though actual low-light performance depends on installation height and ambient light at the specific site.
IP65 and stainless steel construction make this a straightforward external-mount choice; no additional weatherproof housing is implied as necessary by the spec.
As this unit is the main module only, confirm which additional modules (call button, keypad, card reader) your job requires before ordering — they are separate items.
Specifications
- Operating System
- Linux
- Max Resolution
- 2 MP
- Wide Dynamic Range (WDR)
- Support
- Supplement Light
- Low illumination, IR supplement lights
- Video Compression
- H.264; h.265; MJPEG
- Audio Input
- 1 built-in omnidirectional microphone
- Audio Compression
- G.711 U,G.711 A,Opus ,AAC-LD,AAC-LC,G.726 ,G.722.1
- Audio Output
- 1 built-in loudspeaker
- Audio Compression Bitrate
- 64 Kbps
- Audio Quality
- Noise suppression and echo cancellation
- Volume Adjustment
- Adjustable
- User Capacity
- 2000
- Card Capacity
- 6000
- Linked Indoor Station Capacity
- 500
- Network Protocol
- TCP/IP, RTSP, ipv6, onvif
- Alarm Input
- 4 (2 exit buttons and 2 door contacts by default)
- Network Interface
- 1 RJ-45, 10/100 Mbps self-adaptive
- Exit Button
- 2 (2 for lock control)
- Lock Control
- 2 relays, Max. 30 VDC, 2 A
- Installation
- Surface mounting, flush mounting
- Operating Temperature
- -40 °C to 60 °C (-40 °F to 140 °F)
- Operating Humidity
- 10% to 95% (no-condensing)
- Dimensions
- 98 mm × 100 mm × 42 mm (3.86" × 3.94" × 1.65")
- Power Supply
- 12 VDC, 500 mA, IEEE 802.3af, PoE
- Application Environment
- Outdoor
Technical Specifications
Frequently Asked Questions
Does this unit need a separate power supply for the electronic lock?
No — it provides a direct 12 V DC, 500 mA output that can power one electronic lock without an additional PSU.
Can it control more than one door lock?
Yes, it has two-lock control, allowing two separate electronic locks to be managed from the same main unit.
Is this a complete intercom kit?
No — this is the main unit of a modular system. Call button, keypad or card reader modules are separate additions depending on the installation.
What power method does it use?
Standard PoE, so a single Ethernet cable carries both power and network data to the unit.
