Product Description
Key specs
3m HDMI Type A male-to-male, HDMI 2.0 Premium High Speed certified. Rated for 4K@60Hz (3840x2160), 4:4:4 chroma, with 18Gbps bandwidth and HDR support.
Build uses 30AWG OFC copper conductors with triple shielding — foil, braid and drain — plus gold-plated pins for EMI resistance in rack environments running alongside PSUs and PoE switches.
Construction and routing
Jacket is LSZH/PVC, 6mm OD, with moulded strain relief and a 72mm bend radius, suited to cable trays run beside Cat5e and DC power leads. Length works for equipment rack to wall-console or nearby monitor runs without active extenders.
Protocol support
Carries ARC, CEC, HDCP 2.2 and Ethernet channel, useful for multi-screen video wall setups needing audio return and IP control alongside picture. Backward compatible with HDMI 1.4 for older 1080p recorders.
Compliance
RoHS compliant. Supports Dolby TrueHD and DTS-HD Master Audio passthrough for audio monitoring at the operator position.
Suited to linking NVR/DVR HDMI outputs to control-room displays where a fixed 3m run is all that's needed — no adapters, no signal boosting required at this length.
Specifications
- Product Type
- 4K High Speed HDMI Cable
- Connector Type B
- HDMI Type A Male (19-pin)
- Cable Length
- 3
- HDMI Version
- 2.0 Premium High Speed
- Max Resolution
- 4K (3840x2160) @60Hz
- Bandwidth
- 18 Gbps
- Shielding
- Triple Foil + Thin Plate
- Conductor Material
- Tinned Copper
- Wire Gauge
- 30 AWG
- Jacket Material
- LSZH / PVC
- Supported
- ARC, CEC, HDCP 2.2, Ethernet, HDR
- Bend Radius
- 72
- Colour
- Black
Frequently Asked Questions
Will this run 4K at 60Hz without dropping to a lower colour depth?
Yes — it's rated for 4K@60Hz at full 4:4:4 chroma sampling within its 18Gbps bandwidth.
Is it compatible with older 1080p recorders?
Yes, it's backward compatible with HDMI 1.4 for legacy 1080p DVR/NVR outputs.
Does it support HDCP 2.2 for protected content sources?
Yes, HDCP 2.2 is supported alongside ARC, CEC and the Ethernet channel.
What's the bend radius for cable tray routing?
The moulded strain relief allows a 72mm bend radius, with a 6mm OD LSZH/PVC jacket.
