Product Description
Key specs
1m HDMI-A male-to-male, HDMI 2.0 Premium High Speed certified — the working length for NVR-to-monitor or rack-to-desk runs where a longer lead just adds slack.
- 18Gbps bandwidth, 4K@60Hz (3840x2160) at full 4:4:4 chroma, with HDR support
- 30-34AWG OFC copper conductors with triple shielding (foil + braid) for crosstalk rejection in dense racks
- Gold-plated pins, tested for 10,000+ mating cycles
- PVC jacket, 5-6mm OD, moulded strain relief for tight cable management
- Supports ARC, CEC, HDCP 2.2, Ethernet channel and Deep Colour
- Backward compatible with HDMI 1.4 for 1080p@120Hz sources
Why it matters on a job
The triple-shielded 30AWG OFC core is built to sit near Cat6 bundles, PoE injectors and CCTV PSUs without picking up interference — a common failure point on rack builds. EMI immunity keeps signal integrity in dense equipment cabinets.
The Ethernet channel, ARC and CEC support let it double for display control and audio-return duties in multi-screen setups, while HDMI 1.4 backward compatibility means it drops straight into hybrid rigs mixing 4K monitors with older 1080p DVRs or converters.
At 1m it's the sensible starter length for intra-rack HDMI runs — short enough to route cleanly, rated to the standards a commissioning job actually needs checked off.
Specifications
- Product Type
- 4K High Speed HDMI Cable
- Connector Type A
- HDMI Type A Male (19-pin)
- Connector Type B
- HDMI Type A Male (19-pin)
- Cable Length
- 1
- HDMI Version
- 2.0 Premium High Speed
- Max Resolution
- 4K (3840x2160) @60Hz
- Bandwidth
- 18 Gbps
- Shielding
- Triple (Foil + Braid)
- Conductor Material
- Oxygen-Free Copper (OFC)
- Wire Gauge
- 30-34 AWG
- Jacket Material
- PVC
- Outer Diameter
- 5-6
- Contacts
- Gold-plated
- Supported Features
- ARC, CEC, HDCP 2.2, Ethernet, HDR
- Colour
- Black
Technical Specifications
Frequently Asked Questions
What resolution and refresh rate does this cable support?
It's rated for 4K@60Hz (3840x2160) at full 4:4:4 chroma over 18Gbps bandwidth, with HDR support.
Will it work with older 1080p equipment?
Yes — it's backward compatible with HDMI 1.4, supporting 1080p@120Hz for older DVRs or converters.
Is it shielded for use in equipment racks near PoE and CCTV PSUs?
Yes, it uses 30-34AWG OFC copper conductors with triple shielding (foil + braid) to resist crosstalk in dense rack environments.
Does it support ARC, CEC or an Ethernet channel?
Yes — it supports ARC, CEC, HDCP 2.2, an Ethernet channel and Deep Colour processing.
