Product Description
Overview
40m active optical HDMI (AOC) cable, HDMI-A male to male, for extending 4K NVR output to a remote monitor or control-room display beyond copper HDMI's practical range.
Key specs
- HDMI 2.0 High Speed certified, 4K@60Hz (3840x2160) 4:4:4 chroma, 18Gbps bandwidth, HDR and ARC support
- Hybrid OM3 multimode fibre + copper construction, 4.8–5mm OD, Kevlar armoured for long conduit/duct pulls
- External power-free — no inline booster required for rack-to-building spans
- Gold-plated connectors, double foil shielding
- HDCP 2.2, EDID/CEC compliant; supports Dolby TrueHD/DTS:X audio
- Unidirectional, 48mm bend radius; backward compatible with HDMI 1.4 for legacy surveillance integration
- Plenum CMP-rated PVC jacket, -20°C to 70°C operating range, 20kg tensile strength
Deployment notes
Because it's unidirectional, confirm source-to-display orientation before pulling — connectors are marked accordingly on this construction type. The CMP-rated jacket and 20kg tensile rating make it suitable for permanent riser or conduit runs rather than temporary patch use. HDMI 1.4 backward compatibility means it drops into existing surveillance installs still running legacy NVR or display hardware without a protocol mismatch, though bandwidth and 4K@60Hz 4:4:4 performance require an HDMI 2.0 source and sink at both ends.
Specify this length only where the run genuinely needs it — shorter AOC or copper runs remain more cost-effective on cable management for sub-15m spans.
Specifications
- Product Type
- 4K Active Optical HDMI AOC
- Connector Type A
- HDMI Type A Male (19-pin)
- Cable Length
- 40
- Max Resolution
- 4K (3840x2160) @60Hz 4:4:4
- Cable Construction
- OM3 Fibre + Copper Hybrid
- Shielding
- Double Foil + Kevlar Armour
- Fiber Type
- OM3 50/125μm Multimode
- Contacts
- 24K Gold-plated
Frequently Asked Questions
Is this HDMI cable bidirectional?
No, it's unidirectional, so source and display ends must be connected the correct way round.
Will it work with older HDMI 1.4 equipment?
Yes, it's backward compatible with HDMI 1.4, useful when integrating with legacy surveillance hardware.
Does it need external power to run 40m?
No, it's external power-free, so no inline booster is needed for rack-to-building spans.
Is the jacket rated for plenum installs?
Yes, it has a Plenum CMP-rated PVC jacket suited to permanent installations.
