Product Description
Screw-terminal DC plug for on-site termination of 12V power leads on CCTV installs — no soldering iron required.
Fit and application
Male DC connector sized to mate with 5.5mm x 2.1mm DC power sockets, the interface found on CCTV camera power inputs, DVR PSUs and low-voltage LED drivers. Confirm the target device socket is 5.5mm x 2.1mm before ordering — other bore sizes won't seat.
Termination
Positive and negative conductors land on a screw terminal block inside the plug body. That means field re-termination of a cut, damaged, or extended cable without a soldering iron or heat-shrink kit — useful when you're working inside a camera housing, junction box, or enclosure with no room to solder.
Where it's used
- Building or repairing 12V DC power leads for CCTV cameras
- Terminating DVR/NVR power supply cable runs
- LED and other low-voltage 12V DC power wiring
- Fitting inside junction boxes and camera housings during install
Job-site note
Rated for 12V DC systems matching typical CCTV camera and DVR power supply output. This is a plug only — pair it with a compatible DC socket or existing camera lead to complete the run. No solder, flux, or heat-shrink required for termination; a screwdriver is sufficient.
Specifications
- Product Type
- DC male power plug with screw terminals
- Connector Size
- 5.5mm outer diameter × 2.1mm inner diameter
- Termination
- Screw terminals; no soldering required
- Wiring
- Positive and negative power conductors
- Socket Compatibility
- Matching 5.5 × 2.1mm DC female sockets
Technical Specifications
Frequently Asked Questions
What socket size does this plug fit?
It's sized for standard 5.5mm outer diameter x 2.1mm inner diameter DC power sockets.
Do I need to solder the connections?
No — conductors are secured with screw terminals inside the plug body, so no soldering iron is needed.
What voltage is this plug designed for?
It's designed for 12V DC systems, matching typical CCTV camera and DVR power supply output.
Can it be fitted inside a camera housing or junction box?
Yes, its compact design allows installation inside junction boxes, camera housings and power distribution enclosures.
