Product Description
HDMI-EXTENDER-Over-Ethernet-RJ45-4K-KVM-120m carries a 4K HDMI signal, plus digital audio, up to 120 metres over a single run of Cat6 — no HDBaseT switch, no fibre, one cable point-to-point.
Deployment
- Transmitter (TX) connects to the HDMI source: media player, PC, Blu-ray, satellite box or signage controller
- Receiver (RX) connects to the remote 4K display, projector or monitor
- Single Cat6 cable run between TX and RX, point-to-point — no network switch in the path
- Plug-and-play: no drivers, software or configuration steps
Key specs
- Video/audio: 4K HDMI with digital audio, single cable
- Max reach: 120m (400ft)
- Cabling requirement: pure-copper Cat6 required for full 120m reach; Cat6a recommended for best performance
- Topology: point-to-point only, no switch supported between units
- Setup: plug-and-play, no software
Typical install contexts
Suited to jobs where source and display sit well apart from standard cable runs — stadium concourses, retail floors, conference and hotel AV, lecture theatres, museum/exhibition displays, digital signage, and control-room monitoring setups.
Box contents
- 1× HDMI to RJ45 Transmitter
- 1× RJ45 to HDMI Receiver
- 2× Power adapters
- 1× User manual
Specify pure-copper Cat6 (or Cat6a) on the run sheet — budget copper or CCA cable will not deliver the rated 120m distance.
Specifications
- Cable Category
- CAT6
- Connector Type
- HDMI
Technical Specifications
Frequently Asked Questions
What cable is needed to hit the full 120m range?
Pure-copper Cat6 is required for the full 120m reach; Cat6a is recommended for best performance.
Can this run through a network switch?
No — it's a point-to-point connection between transmitter and receiver, with no switch in between.
Does it need any drivers or configuration?
No, it's plug-and-play — connect TX and RX via Cat6, power both units, and the link is live.
What's included in the kit?
One HDMI-to-RJ45 transmitter, one RJ45-to-HDMI receiver, two power adapters and a user manual.
