Product Description
The Cat6 RJ45 Cable 30m Blue – 250MHz U/UTP (MPN RJ45-NETWORK-CABLE-CAT6-30M-BLU) is a fixed 30m run terminated with RJ45 male connectors at both ends, built for installers needing a single long pull without a coupler joint.
Key specs
- Length: 30m (98.43ft), single continuous run
- Category: Cat.6, U/UTP (unshielded twisted pair)
- Bandwidth: 250MHz supported
- Attenuation: 32.8dB/100m @ 250MHz
- Conductor: 24AWG copper, RJ45 male to RJ45 male
- Pins: copper alloy, gold plated
- Connector size: approx. 11.6×22.8×8.3mm — worth checking against crowded wall plates or dense patch fields
- Housing: polycarbonate connector shell; PVC jacket, 5.8mm diameter
- Minimum bend radius: 69mm
- Operating range: -10°C to 60°C; storage -20°C to 75°C
Because it's U/UTP rather than shielded, it relies on twisted-pair balance rather than a foil/braid screen to manage electromagnetic interference — worth noting when routing alongside high-EMI cabling. The 24AWG copper conductors and gold-plated pins support a stable RJ45 termination at each end.
On site this length suits camera-to-NVR runs, patch extensions, or general network drops where 30m in one length avoids an inline coupler. The blue jacket is useful for run identification where multiple cable types or categories are present in the same containment.
No shielding is specified, so plan cable routes with that in mind on runs near power infrastructure or fluorescent fittings.
Specifications
- Cable Category
- CAT6
- Length
- 30m
- Colour
- Blue
- Connector Type
- RJ45
Technical Specifications
Frequently Asked Questions
Is this cable shielded?
No — it's U/UTP construction, meaning unshielded twisted pair rather than a foil or braid screen.
What bandwidth does it support?
250MHz, with nominal attenuation of 32.8dB per 100m at that frequency.
What connectors does it use, and what size are they?
RJ45 male connectors at both ends, approx. 11.6×22.8×8.3mm, with gold-plated copper alloy pins and a polycarbonate housing.
What's the minimum bend radius?
69mm — keep runs above this to avoid stressing the twisted pairs inside the jacket.
