Product Description
Signal path
Transmitter (HDMI in) → single Cat5e/Cat6 run → receiver (HDMI out). No secondary AV cable, no signal converter box beyond the pair supplied.
Key specs
- Max run: 50m between transmitter and receiver over one Cat5e or Cat6 cable
- Resolution ceiling: 1080p Full HD
- HDMI 1.3 source/sink compatibility
- HDCP 1.2 content-protection support
- 165 MHz bandwidth for stable HD transmission
- Kit includes one transmitter (HDMI input) and one receiver (HDMI output)
Spec check before quoting a job
HDMI 1.3 and HDCP 1.2 mean this pairs with source/display gear compliant to those versions — confirm the source device's HDCP handshake before spec'ing onto a job with mixed-generation equipment, since HDCP versions higher than 1.2 aren't listed as supported. For pulls beyond 50m or above 1080p, this isn't the right extender class.
Typical deployments
Media players, DVR/NVR outputs, PCs and signage players routed to displays over existing Cat5e/Cat6 containment — reception screens, meeting rooms, retail displays, projector runs — anywhere a direct HDMI lead can't physically reach.
No transcoding or scaling stage is described beyond the transmitter/receiver pair, so treat this as a straight extension solution rather than a matrix or distribution unit.
Frequently Asked Questions
What's the maximum cable run for this extender?
Up to 50 metres between the transmitter and receiver over a single Cat5e or Cat6 cable.
What resolution does it support?
Up to 1080p Full HD, within the HDMI 1.3 specification.
Does it support HDCP-protected sources?
It supports HDCP 1.2 — check your source device's HDCP version matches before specifying it on a job.
What cable type is needed between the two units?
A single run of Cat5e or Cat6 cable connects the transmitter to the receiver.
