Hikvision DS-3E0318P-E/M(B) 16-Port PoE Unmanaged Network Switch

DS-3E0318P-E/M(B): 16-port Fast Ethernet PoE switch with a ~130 W budget and 300 m Extend mode, built for CCTV backbone runs.

Key specs

• 16 × 10/100 Mbps PoE ports — direct connection for IP cameras, PoE APs and similar edge devices
• 1 × Gigabit RJ45 uplink + 1 × Gigabit SFP fiber uplink — separate copper and fiber backhaul paths
• IEEE 802.3af / 802.3at — supports standard and high-power PD classes
• Up to 30 W per port, ~130 W total PoE budget — check camera load against the budget before design, not after install
• Extend mode: PoE reach to 300 m — useful where cabinet-to-camera runs exceed standard 100 m Cat5e/6
• Switching capacity ~7.2 Gbps, forwarding rate ~5.356 Mpps — store-and-forward architecture
• Metal, fan-free enclosure — silent operation, no moving parts to fail

Deployment notes

Unmanaged, so there's no VLAN or port-monitoring config to maintain — plug-and-play for straightforward camera runs. The SFP uplink gives a fiber option back to the core switch or NVR closet without an extra media converter.

With a 130 W budget across 16 ports, full 30 W-class loading on every port isn't achievable simultaneously — plan camera PoE class and count against the total budget at design stage, particularly on multi-camera IR or PTZ runs.

Extend mode trades link speed for reach on the affected ports; confirm required throughput per camera before relying on the 300 m figure on a live job.