Product Description
IPBOX-METAL-600X500X60 is a 600 x 500 x 60mm metal wall enclosure for housing recorders, power supplies, controllers and cable terminations.
Key specs
- Dimensions: 600 x 500 x 60mm (H x W x D)
- Material: metal
- Mounting: wall-mounted
- Feature: lockable
- Typical contents: recorders, power supplies, controllers, cable terminations
Application notes
At 60mm deep, this is a shallow enclosure — spec it where the recorder, PSU or controller doesn't need much clearance behind the door, rather than for deep-chassis DVRs/NVRs with rear connector bulk. The 600 x 500mm footprint gives enough width for a small NVR alongside a PSU and terminal strip, or a run of cable terminations on a comms/riser board.
Being lockable, it's suited to plant rooms, comms cupboards and riser cupboards where equipment needs to be accessible to authorised personnel only — keeping recorders and power gear off the open wall and out of reach on multi-tenant or public-access sites.
For spec'ing purposes: confirm your recorder/PSU depth and connector clearance against the 60mm internal depth before ordering, particularly where rear-panel cabling (HDMI, network, alarm I/O) adds to the required space.
Frequently Asked Questions
What are the dimensions of the IPBOX-METAL-600X500X60?
600 x 500 x 60mm (height x width x depth).
Is the IPBOX-METAL-600X500X60 lockable?
Yes, it is a lockable metal enclosure.
What equipment can this enclosure house?
It's designed for recorders, power supplies, controllers and cable terminations.
Is the enclosure deep enough for any NVR?
It's a shallow 60mm-deep box, so check your recorder's depth and rear-cable clearance against this before fitting.
