Product Description
IP55-rated grey enclosure, 85 x 85 x 42mm, for housing junctions, PSUs or small network kit on outdoor CCTV and electrical runs.
Key specs
- Dimensions: 85 x 85 x 42mm — compact enough for tight cabinet or wall-mount installs
- Ingress protection: IP55 — protected against dust ingress and low-pressure water jets from any direction
- Finish: Grey
- Use case: indoor or outdoor housing for wiring connections, network switches, power supplies, routers and similar small components
On the job
IP55 covers the water-jet and dust exposure typical of an external cable joint, a PoE injector mounted under an eave, or a junction point on a CCTV run — it is not a submersion rating, so don't specify it for anything that sits in standing water.
The 85 x 85 x 42mm footprint is small enough to drop into an existing containment run or fix directly to a wall or pole where space is tight, while still leaving room to terminate a joint or seat a compact PSU. Mounting and cable-management provisions are built in, so it goes straight onto a job without extra hardware.
Spec it wherever you need a weatherproof mid-run enclosure rather than a full external cabinet: CCTV cable joints, networking setups, industrial automation panels and telecoms wiring all fall within its intended use.
Specifications
- IP Rating
- IP55
- Colour
- Grey
Frequently Asked Questions
What does the IP55 rating on the IPBOX-GREY-85X85X42 cover?
IP55 means protection against dust ingress and low-pressure water jets from any direction — suitable for exposed outdoor runs, not submersion.
What are the dimensions of the IPBOX-GREY-85X85X42?
85 x 85 x 42mm.
Can this enclosure house a network switch or PoE injector?
Yes, the enclosure is sized and designed for small components such as network switches, power supplies and routers.
