Product Description
600 × 500 × 200mm wall-mounted steel enclosure for housing a DVR/NVR, PSU and PoE switch behind a lockable door. Built for installers who need to get recording infrastructure off the desk and into a controlled, mechanically protected space at first- or second-fix stage.
Key specs
- External dimensions: 600mm (W) × 500mm (H) × approx. 200mm (D)
- Construction: powder-coated steel
- Access: lockable front door
- Mounting: wall-mounted, above floor level
- Fit for: DVR, NVR, power supplies, PoE switches, cable termination equipment
Installation notes
Internal volume is sized for a typical single-DVR/NVR install alongside a PSU and PoE switch, with room left for structured cable routing rather than a loose coil behind the recorder. Cable entry is via glands or conduit fitted to suit the site — none are pre-punched from factory, so plan entry points before mounting.
Mounting above floor level keeps the recorder out of dust and away from casual interference in corridors, plant rooms, offices or comms cupboards — useful on jobs where the NVR can't sit in a rack or cabinet the client already controls access to.
Where it fits
This is an enclosure, not a rack: there's no stated support for rack rails or shelving beyond the internal mounting space described. Treat it as a lockable wall box for a self-contained DVR/NVR-plus-PSU setup rather than a multi-unit rack replacement.
Specifications
- Dimensions
- 600 × 500 × 200 mm
- Material
- Steel
Frequently Asked Questions
What equipment fits inside this cabinet?
The internal space is sized for a DVR or NVR alongside a power supply, PoE switch and cable termination equipment.
Does the cabinet come with pre-cut cable entry points?
SOURCE doesn't specify pre-punched entries — cable entry is designed to be added using glands or conduit to suit the installation.
Is this cabinet suitable for outdoor mounting?
SOURCE describes it as a wall-mounted enclosure for control rooms or secure areas; no outdoor or weatherproof rating is stated, so treat it as an internal installation.
What are the external dimensions?
600mm wide × 500mm high × approximately 200mm deep.
