Product Description
IPBOX-GREY-100X100X70: IP65 adaptable enclosure for outdoor cable joints
IP65-rated PVC junction box for on-site cable termination, sized 100 × 100 × 70 mm. Use it wherever a camera run, PoE cable or mains feed needs a sealed, accessible joint outside the fabric of the building.
Key specs
- Ingress rating: IP65 — sealed against dust and low-pressure water jets, suited to exposed wall and pole mounting
- Material: PVC construction, chosen for weather resistance and mechanical strength over sustained outdoor exposure
- Dimensions: 100 × 100 × 70 mm external
- Entry: adaptable body — installers knock out or drill their own cable entries to suit the run
- Fixing: wall-mount, indoor or outdoor
On the job
The internal volume gives enough room for a terminal block, a coax/Cat5e joint, or a small PSU tucked in-line on a camera drop. Because entry points aren't pre-formed, it works equally as a straight-through gland box or a multi-cable junction where several runs need to meet — typical on a CCTV head-end pole or at a building cable entry point.
Compatibility note
This is a generic adaptable enclosure, not tied to a specific camera or NVR range — it pairs with any CCTV, networking or general LV wiring installation where an IP65 outdoor junction is needed. Confirm your terminal blocks or in-line PSU fit within the 70 mm depth before speccing for tight installs.
Specifications
- IP Rating
- IP65
- Dimensions
- 100 × 100 × 70 mm
- Material
- PVC
- Colour
- Grey
Frequently Asked Questions
What IP rating does this junction box carry?
It's rated IP65, sealed against dust ingress and low-pressure water jets, suitable for exposed outdoor mounting.
What are the internal dimensions available for cable connections?
The enclosure measures 100 x 100 x 70mm externally, giving room for terminal blocks and small in-line components.
Does the box come with pre-cut cable entry holes?
No — it's an adaptable enclosure, so installers create cable entry points to suit their own cable run.
Can it be used indoors as well as outdoors?
Yes, it's designed for wall mounting in both indoor and outdoor locations.
