IP Weatherproof Junction Box 330×233×95mm Outdoor Enclosure

IP-BOX-330-233-95-WHITE — external cable enclosure for CCTV and network runs

330 × 233 × 95 mm internal volume, enough to house a mains-to-12V PSU, a PoE injector or splitter, a small switch, and the cable slack for two or three camera runs without cramming connectors against the lid.

Spec sheet doesn't quote an IP rating, so treat it as a general-purpose weatherproof enclosure for sheltered external walls rather than a fully sealed IP66 unit — check exposure before siting it on an unprotected elevation.

Build and fixing

• Durable plastic housing, weather-resistant against dust and moisture ingress typical of outdoor runs
• Hinged cover with locking clips — closes securely but opens for maintenance without tools
• Wall mounting brackets included, suitable for walls, poles or other flat mounting surfaces
• Internal space rated for cable management plus small electronic devices (splitters, PSUs, network gear)

Typical uses on a job

Fitted where a CCTV or data cable run needs a mid-point termination point outdoors — housing a junction, a PoE splitter, or a power supply for a camera or outdoor AP away from an internal comms cabinet. Equally applicable to electrical wiring junctions where a protected outdoor enclosure is specified.

Keep entry glands and cable routing planned before fixing — the box is supplied as an empty enclosure with no pre-fitted glands, connectors or internal fittings mentioned in the spec.