Product Description
The IP65 Junction Box 190x160x70mm Grey PVC is an adaptable enclosure for protecting cable joints and splice points on CCTV and networking installs.
Key specs
- Rating: IP65 waterproof
- Material: PVC
- Type: Adaptable enclosure
- Colour: Grey
- Dimensions: 190 x 160 x 70mm
Application
IP65 waterproof rating suits both outdoor and indoor mounting, so it can be used at a camera pole, a wall-mounted joint, or an internal cabinet where a sealed splice point is needed. As an adaptable enclosure, it is supplied without pre-fitted cable entries — glands and knockouts are added on site to suit the cable run, so check your cable outer diameters against the available panel area before specifying glands.
Fitting it into a job
On a CCTV or PoE network run, this box gives installers a sealed point to terminate or joint cable outdoors without exposing the connection to the weather. The 190x160x70mm footprint sets the internal working space available for terminal blocks, connectors or gland plates — measure against your actual hardware before ordering multiples for a multi-camera run.
No mounting hardware, glands or knockout sizes are specified, so plan cable entry positions before installation.
Specifications
- IP Rating
- IP65
- Dimensions
- 190 × 160 × 70 mm
- Material
- PVC
- Colour
- Grey
Frequently Asked Questions
Is this box pre-drilled for cable glands?
No — it is described as an adaptable enclosure, meaning cable entries are fitted on site rather than supplied pre-drilled.
Can it be used outdoors?
Yes, it carries an IP65 waterproof rating and is described as suited to both outdoor and indoor use.
What size is the enclosure?
It measures 190 x 160 x 70mm, which sets the internal space available for terminal blocks or connectors.
What material is the box made from?
It is made from PVC in grey.
