Product Description
20m Cat6 RJ45 patch cable — spec-first overview
This is a 20-metre Cat6 UTP patch lead rated for gigabit (1000Mbps) links, built on 24AWG copper conductors with gold-plated pins and moulded RJ45 male connectors at both ends.
Key specs
- Supported bandwidth: 250MHz, nominal attenuation 32.8dB/100m @250MHz
- Construction: unshielded twisted pair (UTP), PVC jacket, 5.8mm jacket diameter
- Conductor: copper, 24AWG gauge; connector housing polycarbonate
- Minimum bend radius: 69mm
- Operating temperature: -10°C to 60°C; storage -20°C to 75°C
- Certifications: RoHS, REACH, UL, California Proposition 65
Why the length and rating matter on site
At 20m this run covers a loft-to-switch drop, a cross-room camera feed, or a between-floors NVR link without needing a coupler. The 250MHz bandwidth and low attenuation figure keep a gigabit link stable over that distance, and backward compatibility with Cat5 gear means it drops straight into mixed-generation installs without re-terminating anything upstream.
Build quality is rated to handle both indoor and outdoor environments, so the same cable spec works whether it's tucked under carpet, run through a ceiling void, or routed to an externally sited camera enclosure — check your own containment and connector protection at any outdoor termination point.
Compatibility note
RJ45 male-to-male terminations and UTP construction make this a drop-in replacement or extension for existing Cat5/Cat6 runs feeding switches, NVRs, or PoE-capable CCTV cameras, subject to the PoE device's own cable-length and power-budget guidance.
Specifications
- Ethernet Version
- Cat6
- Color
- Black
- Length
- 20m
- Features
- Suitable for CCTV, Suitable for POE, Suitable for VOIP Phones
Technical Specifications
Frequently Asked Questions
What bandwidth and speed does this 20m Cat6 cable support?
It's rated for 250MHz bandwidth with nominal attenuation of 32.8dB/100m at 250MHz, supporting gigabit (1000Mbps) connections.
Is this cable suitable for outdoor CCTV runs?
The build is rated to handle both indoor and outdoor environments, though you should still protect any outdoor connector terminations appropriately.
Will this cable work with existing Cat5 network equipment?
Yes, it's backward compatible with Cat5 devices, so it can extend or replace runs in mixed-generation installs without re-terminating other equipment.
What connectors and conductor type does it use?
It has moulded RJ45 male connectors at both ends with gold-plated pins, over 24AWG copper conductors in an unshielded twisted pair (UTP) PVC-jacketed cable.
