Product Description
CAT6 RJ45 Connectors – Gold Plated, 10Gbps
A 3m U/UTP patch lead built to the Cat6 standard, rated for 10,000 Mbit/s (10Gbps) data transfer at 250 MHz. Terminated both ends with male RJ45 connectors, it's a straightforward drop-in for CCTV runs between cameras, switches and NVRs, as well as general router/PC networking.
Key specs
- Cable standard: Cat6, U/UTP shielding
- Conductor: 24 AWG stranded copper
- Data rate / frequency: 10,000 Mbit/s at 250 MHz
- Connectors: RJ45 male to RJ45 male
- Jacket: Low smoke zero halogen (LSZH), halogen-free, RoHS compliant
- Length / OD: 3m, 6mm outer diameter
- Colour: Black, round cable construction
Build detail
The stranded copper core sits under an LSZH jacket with kink protection, strain relief and latch protection on the boots — useful where cables get routed tight around cabinets or through containment on install jobs. The snagless boot design keeps the latch protected during repeated pulls through trunking.
Fitting on site
At 3m this is a short patch length — suited to switch-to-NVR, camera-to-local-switch, or patch panel jumps rather than long backbone runs. Its Cat6 rating and 24 AWG stranded copper conductors make it a like-for-like swap wherever an existing Cat5e or Cat6 U/UTP patch lead needs replacing on a CCTV or general LAN installation.
Specifications
- Colour
- Black
- Connector Type
- RJ45
Technical Specifications
Frequently Asked Questions
What data rate does this Cat6 cable support?
It's rated for 10,000 Mbit/s (10Gbps) at 250 MHz, per the Cat6 U/UTP specification.
What connector type does it use?
Male RJ45 connectors are fitted at both ends of the cable.
Is the cable shielded?
It uses U/UTP construction — unshielded twisted pairs inside an unshielded overall jacket.
What is the cable jacket made from?
It's a low smoke zero halogen (LSZH) jacket, and the cable is halogen-free and RoHS compliant.
