Product Description
Passive PoC video balun with BNC and screw terminals, rated for cameras up to 8MP (4K).
Converts HD-TVI, AHD, CVI or CVBS coax signal onto Cat5e/Cat6 twisted-pair, and carries Power over Coax so a PoC-compatible camera is powered down the same cable run as its video — one less core to pull on first fix.
Key specs
- Passive design — no external power required at the balun
- Video formats: HD-TVI, AHD, CVI, CVBS
- Resolution: up to 8MP / 4K
- PoC: supports Power over Coax transmission
- Connections: BNC (camera/DVR side), screw terminal block (UTP side)
- Cable: Cat5e or Cat6 twisted pair
Deployment notes
Used in pairs — one balun at the camera end, one at the DVR or NVR end — so specify two units per camera run. The screw terminal block takes bare twisted-pair conductors without a crimp tool, which speeds up termination on multi-camera first fixes where structured cabling is already run or preferred over coax.
Suitable for HD-TVI, AHD, CVI and CVBS-based systems up to 8MP, covering most current HD-over-coax DVR generations. Confirm your DVR/camera's supported format and resolution before specifying, as compatibility depends on the head-end equipment rather than the balun.
Specifications
- Resolution
- 8MP
- Colour
- Black
- Connector Type
- BNC
Frequently Asked Questions
What video formats does this balun support?
HD-TVI, AHD, CVI and CVBS analogue video formats, as stated for this model.
Does it need its own power supply?
No — it is a passive balun and requires no external power itself.
What cable should I run to the screw terminal side?
Cat5e or Cat6 twisted pair cable, connected via the screw terminal block.
How many baluns do I need per camera?
Two — baluns of this type are used in pairs, one at the camera and one at the DVR end.
