Product Description
The EZJC011 is a 115 × 115 × 45 mm junction box for terminating cable connections behind an EZ-IP dome or bullet camera, giving installers an enclosed space for connectors, power adapters and network terminations instead of leaving them exposed at the mount point.
Key specs
- Dimensions: 115 × 115 × 45 mm
- Mounting: wall or ceiling fixing
- Camera compatibility: dome and bullet CCTV cameras
- Environment: rated for indoor and outdoor cable routing
- Internal capacity: sized to hold connectors, power adapters and network terminations
On the job
Termination points sit inside the enclosure rather than under the camera base, so the mount presents a single clean cable entry instead of loose glands or taped joins. This matters on masonry or steelwork fixings where a neat termination point speeds up snagging and servicing later, and where connections need shielding from weather and accidental knocks on both internal and external runs.
Compatibility note
The box is built for EZ-IP camera installs and accepts dome or bullet bodies at the mounting face — check the specific camera's base plate footprint against the 115 × 115 mm box face before ordering for a given model.
No electronics are fitted inside — it's a passive enclosure for cable and connector protection, not a power or network device in its own right.
Frequently Asked Questions
What are the dimensions of the EZJC011?
115 × 115 × 45 mm.
Can the EZJC011 be used outdoors?
Yes, the enclosure is designed for both indoor and outdoor cable routing.
Which cameras does the EZJC011 fit?
It's suitable for dome and bullet CCTV cameras in the EZ-IP range; check the camera's base plate footprint against the 115 × 115 mm box face.
Can it be mounted on a ceiling as well as a wall?
Yes, it's designed for either wall or ceiling mounting.
