CCTV Camera Rain Sun Shield Cover 270x220 Turret Dome

270x220mm rain and sun shield/canopy for turret and dome CCTV cameras, fixed above the camera on a wall or flat surface to cut direct rain and sun exposure on the lens.

Why it's on the spec sheet

Direct rain on the lens causes droplet distortion on the image; direct low-angle sun causes glare and washout. The curved hood sits above the camera to reduce both, without blocking the camera's viewing angle — important on turret units where the sensor is angled rather than sat under a flat dome.

Fit and mounting

• Sized 270x220mm — check against the camera's turret/dome housing dimensions before ordering
• Mounts above the camera on a wall or flat surface as a separate bracket, not integrated into the camera housing
• Mounting screws and wall plugs are included, so no separate fixings need sourcing
• Body is a durable, weather-resistant plastic intended for long-term outdoor use

Where to specify it

Use on installs where turret or dome cameras face west or south into low sun, or sit in exposed spots with no eave cover — entrances, perimeter walls, loading bays and wall-mounted units on residential or commercial blocks. It's a bolt-on addition to an existing camera install rather than a wiring job, so it can be retrofitted on site.

Confirm compatibility against the housing diameter of the specific turret or dome model before specifying, as fit will vary by camera make.