Product Description
A 6U wall-mount enclosure at 600×350×370mm (W×D×H) sized for 19-inch patch panels and switches on jobs where floor-standing racks aren't an option.
Key specs
- 6U capacity, standard 19-inch rack rail spacing
- External dimensions: 600mm (W) × 350mm (D) × 370mm (H)
- 350mm depth — check this against switch/PoE unit body length before speccing; shallow-depth units only
- Steel construction, black powder-coated finish
- Lockable front door for restricted equipment access
- Ventilated side/rear panels for passive airflow around active gear
Deployment notes
Depth is the constraint that matters here: 350mm accommodates most access switches and patch panels but won't take deep enterprise chassis or NVRs with rear cabling clearance needs — confirm equipment depth first. The lockable door suits comms cupboards and shared-access plant rooms where physical access control on the enclosure is a requirement, not just the room.
Commonly specified for structured cabling distribution points and small CCTV head-end installations — NVR, PoE switch and patch panel in a single wall-mounted footprint rather than a full-height rack. Compatible with standard 19-inch rack-mount hardware, so existing panels and shelves from other 19-inch cabinets will fit without adapters.
Specifications
- Width
- 52cm
- Depth
- 30cm
- Height
- 35cm
Frequently Asked Questions
What's the usable depth for equipment in this cabinet?
External depth is 350mm, so check your switch or panel body length against that before specifying — it's a shallow-depth enclosure, not suited to deep chassis equipment.
Does the cabinet come with a lock?
Yes, it has a lockable front door for restricting access to installed equipment.
Will standard 19-inch patch panels and switches fit?
Yes, it's built to the standard 19-inch rack format, so compatible patch panels, switches and other 19-inch rack-mount hardware fit directly.
Is this suitable for a CCTV NVR install?
It's commonly used for small CCTV head-end setups combining an NVR, PoE switch and patch panel, provided the equipment fits within the 350mm depth.
