Product Description
One 10m shotgun lead runs both video and 12V power to a single analogue camera in one pull. The RG59P-CABLE-10M (also listed as UNB-CABLE-10M-RG59P) combines 75Ω RG59 coax with a bonded 2-core DC power pair, so a single fixed-length harness replaces separate coax and power runs.
Video path
- 75Ω RG59 coax rated for analogue CVBS and HD-TVI/AHD/CVI signals.
- BNC male connectors factory-fitted at both ends — plugs straight into a camera's BNC output and a DVR/NVR's BNC input, no crimping or baluns.
Power path
- Integrated red/black 2-core DC pair runs alongside the coax.
- 2.1mm DC plug at the camera end, 2.1mm DC socket (or bare tails) at the supply end, for 12VDC distribution from a central PSU.
Build
- Moulded strain-relief on both BNC and DC connectors, reducing wear at connection points during install or later fault-finding.
- External-grade PVC jacket, suitable for internal runs or sheltered external routing when clipped and supported.
Where it fits
Use this lead for a direct single-camera-to-DVR/NVR run, or from camera to a field junction box, on jobs where BNC coax is already the chosen video method. It works with 12V CCTV cameras using standard BNC terminations and 2.1mm DC connectors, and can be extended with DC extension leads or splitters where power is centralised.
Note: voltage drop over long or undersized cable runs is a common cause of night-time IR flicker or dropout on analogue cameras, so check total run length and PSU rating when specifying this lead for longer distances.
Specifications
- Product Type
- RG59 CCTV BNC + DC Power Shotgun Cable
- Cable Length
- 10
- Length Unit
- metres
- Video Cable Type
- RG59 75Ω coaxial
- Video Connectors
- BNC male to BNC male
- Power Cable Type
- 2‑core DC power (shotgun with RG59)
- Power Connectors
- 2.1mm DC plug and 2.1mm DC socket / tails
- Impedance
- 75 Ω (video)
- Suitable Signal
- CCTV camera to DVR video and power
Technical Specifications
Frequently Asked Questions
What connectors are fitted to this cable?
BNC male plugs are factory-fitted at both ends of the RG59 coax, and the integrated DC pair terminates in a 2.1mm DC plug at the camera end with a 2.1mm DC socket or bare tails at the supply end.
Which camera types is this lead suitable for?
It's designed for analogue CVBS and HD-TVI/AHD/CVI cameras using standard BNC video connections and 12V DC power via a 2.1mm connector.
Can this lead be extended for longer camera runs?
Yes, it can be used with additional DC extension leads or splitters where power needs to be distributed from a central supply, though voltage drop should be checked on longer runs.
