RG59 CCTV Cable 10m BNC Video with DC Power Shotgun Lead for Camera to DVR

The RG59P‑CABLE‑10M is a 10m ready‑made CCTV shotgun lead combining a 75Ω RG59 coaxial video line with a parallel two‑core DC power cable, allowing both video and power to be run between a single camera and the recording equipment in one harness. BNC male connectors are factory‑fitted to each end of the RG59 coax, providing a direct plug‑in connection between the camera’s BNC output and the DVR/NVR BNC video input without additional crimping or baluns. The integrated DC pair terminates in a standard 2.1mm power plug at the camera end and a matching 2.1mm power socket or bare tails at the DVR/PSU end, enabling 12VDC distribution from a central power supply. This type of cable is widely used for analogue CVBS and HD‑TVI/AHD/CVI cameras where traditional coax connectivity is required, and is suitable for short to medium‑length runs in residential or small commercial systems. The shotgun construction keeps video and power conductors neatly bound, simplifying routing along walls, through joists or into trunking, and reduces installation time compared with pulling separate coax and power cables. Moulded strain‑relief on the BNC and DC connectors improves durability under repeated handling at the camera and recorder ends. External‑grade PVC jacketing on many 10m assemblies makes them suitable for indoor use or for sheltered external runs when properly clipped and supported. This 10m BNC plus power lead is typically used to connect a single bullet, dome or turret camera directly back to a DVR in small systems or to field junction boxes in larger installations. It is compatible with most 12V CCTV cameras using 2.1mm DC connectors and standard BNC terminations, and can be used with additional DC extension leads or splitters where centralised power distribution is required.